The wireless touch screen keypad is a wall-mounted, full-color, touch screen interface that provides many of the same easy-to-use keypad functions available on the control panel. It is designed for indoor use only.

This Thin Door/Window contact is designed for use on doors, windows, and other objects that open and close. It communicates with the control panel so when the magnet (which is mounted near the sensor) moves away from or closer to the door contact sensor, signals are transmitted.

This Passive Infrared Motion Detector is a wall-mounted unit with a wide-angle motion protection. It communicates with the control panel. When set to High Sensitivity Mode, the motion detector has a maximum range of 30 ft deep x 50 ft wide. This Motion Detector is pet-immune and can be set to tolerate animals up to 55 lbs.

This Wireless Smoke/Heat/Freeze Alarm is a 3xAAA battery-powered wireless alarm. The alarm has a built-in wireless transmitter which communicates with the control panel. When smoke, excessive heat or cold is detected, the alarm sounds a loud local alarm and the built-in transmitter sends a signal to the monitoring station.

This Wireless Carbon Monoxide Alarm is a 3V battery powered wireless detector. This detector consists of an electrochemical carbon monoxide assembly coupled to a wireless transmitter. 

This Glass Break Detector is a fully-supervised, tamper-protected, ceiling-or-wall-mounted unit. The detector provides a 15 ft maximum detection range, 360 degrees maximum horizontal sensing angle, and dual-stage glass break detection.

Add video to your security alarm system. These camera add exceptional value, features, and ease-of-use.